Rich Solar ALPHA 1 PRO 12V 100Ah LiFePO4 Energy Storage Battery
Equipment Type and Primary Applications
Lithium iron phosphate (LiFePO4) energy storage battery delivering 1,280Wh for off-grid solar arrays, solar microgrids, marine battery banks, and telecom backup systems. The 12V-format module is designed for expandable energy storage configurations.
Performance Specifications
- Nominal voltage: 12.8V; capacity: 100Ah; rated energy: 1,280Wh.
- Cycle life: 7,000 full cycles.
- Maximum continuous charge/discharge current: 100A; peak current: 110A for 10 seconds.
- Recommended charge input: 50A; charging target: 14.4V ±0.2V using a CC/CV algorithm.
- Expansion capability: up to 4P4S configuration.
- Operating temperature: charge 32–131°F; discharge -4–140°F.
- Construction: IP65 ABS casing; footprint 10.2 x 6.6 x 8.3 inches; weight 24.0lb.
Safety Features and Certifications
The integrated 100A battery management system provides overvoltage, undervoltage, overcurrent, and short-circuit cutoffs. Thermal-runaway prevention and automatic low-temperature charge blocking are included. The battery carries UL 1973, FCC, UN38.3, and ETL certifications.
Installation and Maintenance Requirements
Install on a level surface with adequate ventilation and torque terminals according to the manual. Verify BMS status during startup. Inspect electrical connections semi-annually, perform annual insulation checks, and store at partial capacity in moderate climates.
Warranty and Service Information
A ten-year warranty covers manufacturing defects and acceptable capacity fade. Support is provided through authorized distributors with remote diagnostics.
Branding/References
Manufacturer: Rich Solar. Series: ALPHA 1 PRO. Reference manufacturer datasheets for schematic details.
Differentiators
A built-in 100W heater activates below 41°F and warms the cells above 50°F before charging, eliminating external preheat requirements.