
Anker SOLIX C2000 Gen2 Portable Power Station System
Equipment Type: 2 kWh LiFePO4 portable power station bundle.
Primary Applications: Home backup, RV/van touring, off-grid camping, emergency preparedness, and event power distribution.
Performance Specifications
- Capacity: 2,048Wh at 51.2V (LFP), expandable to 4kWh
- Cycle Life: 4,000 cycles to 80% retention
- Output: 2,400W continuous AC, 4,000W peak; dual 140W USB-C, single 15W USB-C, 12W USB-A
- Inputs: AC 1,800W max (120V~/12A); PV/XT-60i 11-60V⎓17A, 800W; alternator charging support
- UPS Transfer: 10 ms
- Solar Array: PS400 model; 400W peak; 23% cell efficiency; IP67 rated
Safety Features and Certifications
BMS regulates thermal runaway and discharge limits. Alternator controller auto-detects vehicle battery chemistry to prevent overcharge. Solar enclosure meets IP67 dust/water ingress standards.
Installation and Maintenance Requirements
- Connect panel via XT60 or 9.8 ft cables to unit
- Secure alternator adapter to vehicle 12V accessory port
- Operate only between -4°F and 104°F; charge between 32°F and 104°F
- Perform monthly full charge/discharge cycles during storage intervals
Warranty and Service Information
Five-year limited warranty covers manufacturing defects and capacity degradation below stated thresholds. Remote diagnostics supported via paired mobile application.
Branding/References
Anker SOLIX C2000 Gen2, PS400 solar panel, compatible alternator charger. Refer to Anker SOLIX official datasheets and integration manuals for wiring diagrams.
Differentiators
Bi-directional inlet allows direct AC bypass switch integration for residential transfer. Dynamic alternator charging leverages vehicle generator output to achieve full replenishment in three hours, bypassing standard socket amperage restrictions.
| Specification | Details |
| Battery Type | LFP |
| Cell Capacity | 51.2V / 40000mAh / 2,048Wh |
| Cycle Life | 4000 Cycles |
| Specification | Details |
| AC Input (AC Charging Cable) | 120V~ 15A Max (< 3 Hr), 1800W Max, 12A (Continuous), 60Hz, L+N+PE |
| PV /XT-60i Input | 11-60V⎓17A Max, 800W |
| Specification | Details |
| AC Output (NEMA 5-20R) | 120V~ 20A Max, 60Hz, 2400W Max |
| Car Charger Output | 12V~10A |
| AC Output (Bi-Directional Inlet box) | 120V~ 15A Max, 1,800W Max, 60Hz, L+N+PE |
| USB-A Output | 5V⎓2.4A, 12W Max |
| AC Output (TT-30R) | 120V~ 20A Max, 60Hz, 2400W Max |
| USB-C Output | USB-C1 Output: 5V⎓3A/ 9V⎓3A/ 12V⎓3A/ 15V⎓3A/ 20V⎓5A/ 28V⎓5A (140W Max.) | USB-C2 Output: 5V⎓3A/ 9V⎓3A/ 12V⎓3A/ 15V⎓3A/ 20V⎓5A/ 28V⎓5A (140W Max.) | USB-C3 Output: 5V⎓3A (15W Max.) | Note: When 15W USB-C and 12W USB-A ports are used simultaneously, total output is limited to 20W. |
| Peak Power | 4000W |
| Specification | Details |
| UPS | 10 ms |
| Specification | Details |
| Recharging Temperature | -4°F-104°F / -20°C-40°C |
| Charging Temperature | 32°F-104°F / 0°C-40°C |
| Specification | Details |
| Dimensions | 18.1 × 9.8 × 10.1" (459 × 250 × 257 mm) |
| Net Weight | 18.9 kg |
| Specification | Details |
| Peak Power | 400W |
| Open Circuit Voltage | 57.6V |
| Operating Voltage | 48V |
| Rated Current | 8.33A |
| Cell Efficiency | 23% |
| Net Weight | 20.34 lb | 9.23 kg |
| Product Dimensions (Folded) | 35.9 × 25.9 × 1.9 in | 913 × 659 × 47 mm |
| Product Dimensions (Unfolded) | 102 × 35.9 × 1.2 in | 2,591 × 913 × 30 mm |
| Product Weight | 35.1 lb | 15.9 kg |
| Operating Temperature | 4°F-140°F | -20°C-60°C |